Mobile Mark Antenna Solutions Product Catalogue 2017-2018

US Office: Tel: 800.648.2800 or +1.847.671.6690 UK Office: Tel: (+44) 1543 459 555 www.mobilemark.com

a n t e n n a s o l u t i o n s

• Integral spring provides strength at speed and provides flex for overhead obstructions •Ground plane independent designs can be used on any surface •Seperate cable assemblies allow choice of cable length and connector type. Surface Mount Spring Mount WiFi, 2.4 & 5 GHz The heavy duty spring maintains the antenna’s verti- cal position at all speeds, but will deflect if hit by an obstruction. Cable assemblies from Mobile Mark for the ECOS are sold separately, however they can be added to the order at the time of purchase.

Mirror Mount

Spring Mount

Mobile Mark’s spring mounted ECO Mobile Series antennas cover popular systems: WiFi 2.4 or 5 GHz, Public Safety 4.9 GHz, 5 GHz Broadband and DSRC 5.9 GHz. These ECOS antennas are ground plane independent and can be used on any surface. High gain coupled with low loss cable compensates for the losses that occur at higher bands. These models terminate on the bottom with an SMA Female connector. The spring mount antennas can be paired with low loss cable assemblies plugged into the Direct N Jack to complete the connection. The ECOS have the radiating element located higher in a longer radome. The spring on the ECOS model is strong and flexible enough to handle impact with obstacles such as tree branches overhead in a vehicle mounted application.

Models Spring Mount Omni Models Model

Frequency

Gain

ECOS5-2400DN-BLK ECOS8-2400DN-BLK ECOS6-5500DN-BLK ECOS9-5500DN-BLK

2.4 - 2.5 GHz 5 dBi 2.4 - 2.5 GHz 8 dBi 5.0 - 6.0 GHz 6 dBi 5.0 - 6.0 GHz 9 dBi

Add “SM-MM” for Mirror Mount Option Typical cable assemblies: CA

Specifications Frequency:

See above See above

Weight:

>1 lb (0.45 kg) all models not including cable assembly

Gain: VSWR

2:1 over band

Impedance:

50 Ohm nominal

Height: 5 dBi

Maximum Power: Operating Temp:

10 Watts

16.3 in/41 cm 12.5 in/30 cm 24.8 in/63 cm 16.3 in/41 cm

-40 o to +85 o C

6 dBi 6 dBi 9 dBi

Radome:

Fiberglass (black) Brass chrome plated

Base/Mount:

Mounting Depth: Base Dimension:

1/4” thick surface (6.4 mm) 1.5”Diameter (38 mm) Heavy duty Stainless Steel, 3/4” diameter (19 mm)

Mounting:

Top mount assembly, “tilt-in” with internal teeth & locking ring

Spring:

Termination:

“N” Jack

Specifications subject to change without notice (03/2017)

Made in the USA

85